Please, proceed carefully following the tips published in this blog, specially when Main Power is involved. I'm not responsible for any damages caused by what is written in this blog.
Thank you

Tuesday, 1 August 2017

Home Automation System - New mailbag...

In the meantime, time passes by and a new mailbag is arrived; it contains new toys for my Home Automation System: a Basic SONOFF and a Raspberry PI 3.

The Basic SONOFF is a simple WiFi switch, as the SONOFF Pow, which we already know, but without the power measurement chip. In simple words, it's a WiFi controlled relay.

The Raspberry PI 3 is the world famous mini PC (see https://www.raspberrypi.org/products/raspberry-pi-3-model-b):

- Quad Core 1.2GHz Broadcom BCM2837 64bit CPU
- BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board
- 40-pin extended GPIO
- 4 USB 2 ports
- 4 Pole stereo output and composite video port
- Full size HDMI

I will use it as an OpenHab v.2 server, with some addons as the MQTT broker...

I already own a Raspberry PI 2, but it's already running OSMC, a very nice Operating System which transforms PC in Media Center.

With the Raspberry PI 3 I received also a good "starter-kit": a 3A power supply , a transparent case and some heatsinks (see https://www.amazon.it/dp/B01DDFFOYK/ref=cm_sw_r_cp_dp_T2_UUqGzb73MSE2T)

In the next posts, I will write some words about the Raspberry PI 3 and OpenHab v.2 setup

No comments:

Post a Comment