Arduino Uno Rev 3 Starter Kit

After many research over the internet, we decided to buy on ebay the Arduino Uno Starter Kit.

We got it in a few days.

It contains:

• 1 Arduino UNO R3 Board, made in Italy
• 1 USB Cable 50cm
• 1 Breadboard 830 points
• 1 Display LCD 16X2 backlighted, Hitachi HD44780 driver
• 2 Linear Pots 10Kohm
• 2 Knobs
• 1 9V Battery connector
• 65 Jumpers
• 10 Buttons
• 1 Buzzer
• 1 relay 5V 10A 250VA
• 1 Temp Sensor LM35
• 2 Transistor BC547
• 1 Light Sensor
• 10 Red LED
• 10 Yellow LED
• 10 Blue LED
• 10 Green LED
• 10 White LED
• 1 RGB LED
• 2 capacitors 4,7uF 100V
• 5 Diode 1N4007
• 10 Resistor 1Kohm
• 10 Resistor 10Kohm
• 10 Resistor 4,7Kohm
• 20 Resistor 470ohm

I think we have enough things to begin experiments...

In the same shipping we received also:

RF 433 Mhz Transmitter and receiver modules

Ethernet shield based on W5100 chip with an sd card reader on board

an MQ-4 gas sensor

some RGB LED

Ok, don't waste our time...we are ready to begin some real experiments...